Key Takeaway
-
For most Hong Kong offices, the strongest and most practical design is one integrated security ecosystem with clear ownership, privacy controls and a tested incident response. Before staff move in, decision-makers should ensure the following:
- Design from risk, not from a product list. Map entrances, lift lobbies, reception, server rooms, executive areas, stock rooms, emergency exits and after-hours access before selecting cameras, readers or sensors.
- Use AI-enabled CCTV selectively. Prioritise analytics such as line crossing, loitering, object detection, camera tamper alerts and video verification. Disable facial recognition, audio and individual tracking unless there is a documented, proportionate business need.
- Make access control convenient and resilient. Mobile credentials can reduce card administration, while biometrics require stronger justification and privacy safeguards. Keep an alternative credential and a controlled manual process for outages, visitors and employees who cannot or should not use biometrics.
- Specify a verified burglar alarm response. Protect perimeter doors, vulnerable windows and critical rooms, then connect alarm events to video verification, named keyholders and a monitored escalation procedure. False-alarm performance matters in Hong Kong because repeated false calls can reduce police response.
- Treat privacy and cybersecurity as acceptance criteria. Complete a privacy impact assessment, define retention periods, display CCTV notices, restrict administrator rights, encrypt data, segment security devices from the corporate network and log all privileged activity.
- Do not accept the system until it is tested end to end. Test every camera view, access rule, emergency release, alarm sensor, backup battery, network failure mode, notification path and incident report. Obtain drawings, licences, passwords, warranties, training records and maintenance SLAs at handover.
Why security planning must start during office fit-out
In Hong Kong, office projects typically involve the tenant, landlord or property management office, fit-out contractor, fire services contractor, IT team and security integrator. Late security decisions create predictable problems: cameras lose their intended field of view, access-controlled doors conflict with life-safety requirements, network ports and PoE capacity are insufficient, and alarm contacts are omitted from doors or windows. The remedy is to include security in the design coordination and testing programme, not add it after practical completion.
A well-scoped solution should protect people, confidential information and physical assets while maintaining a smooth employee and visitor experience. Hong Kong Police describes access control as a three-stage process: authentication, authorised entry to an authorised area at an authorised time, and control of movement and exit. That is a useful design test for every controlled area.
Quick procurement checklist
|
Workstream |
Minimum move-in deliverable |
Business owner |
Acceptance evidence |
|
Risk and design |
Zone plan, threat scenarios, device schedule, privacy assessment |
Security + Workplace |
Approved drawings and risk register |
|
AI CCTV |
Coverage plan, analytics rules, retention, notices, user roles |
Security + Privacy/Legal |
Day/night images, analytics and export test |
|
Access control |
Door matrix, mobile/biometric policy, visitor flow, emergency release |
Security + HR + IT |
Credential, denied-access and fire-interface tests |
|
Burglar alarm |
Sensor schedule, monitored response, keyholders, video verification |
Security + Facilities |
Walk test, escalation drill and battery test |
|
Cybersecurity |
Network segregation, hardening, MFA, backups, patch plan |
IT |
Configuration baseline and recovery test |
|
Handover |
Training, as-built drawings, licences, passwords, warranties, SLA |
Procurement + Project Lead |
Signed completion and defect list |
1. AI-enabled CCTV surveillance system checklist
AI video analytics can turn CCTV from a passive recording tool into a faster detection and verification layer. For a Hong Kong office, the business case is strongest when analytics solve a defined risk: unauthorised after-hours entry, tailgating near a controlled door, loitering at a reception or loading area, removal of an object, or a camera being blocked or moved.
Plan the right coverage
- Cover entrances and exits, reception, lift lobby interfaces, delivery points, server or communications rooms, high-value storage and other risk-based locations.
- Avoid toilets, changing rooms, private rest areas and locations where people reasonably expect privacy.
- Confirm day and night image quality, backlighting, blind spots, reflections from glass partitions and whether identification-quality images are genuinely required.
- Set a documented retention period based on incident needs and legal/business requirements. Avoid keeping footage indefinitely.
- Place clear, prominent CCTV notices before monitored areas and provide a privacy notice explaining purpose, access and enquiries.
Check how to choose the right CCTV system for your premises.
Choose AI functions with discipline
- Prefer event analytics that minimise personal-data use: line crossing, intrusion zones, loitering, people counting, object left/removed and camera health.
- Require operators to verify AI alerts before escalation. Analytics can misclassify reflections, shadows, cleaning activity or changes in furniture.
- Document accuracy expectations and test with real office conditions. Include alert latency, missed-event and nuisance-event tests.
- Disable facial recognition, audio and individual tracking by default unless a written necessity and proportionality assessment supports them.
The Hong Kong PCPD nevertheless stresses necessity, proportionality, transparency and data minimisation, and recommends a privacy impact assessment before installation.
Check out the AI CCTV surveillance models: Edge AI vs. Cloud AI vs. Hybrid Models

2. Access control checklist: mobile credentials and biometrics
Access control should connect identity, time, location and authorisation. The door matrix should show who can enter each area, during which hours, with what credential, and what happens during fire alarm, power failure, network failure or a security lockdown.
Mobile credential requirements
- Support secure credential issuance and revocation without sharing personal administrator accounts.
- Define what happens when a phone is lost, replaced, offline or out of battery. Keep a controlled fallback such as a physical card or reception-issued temporary credential.
- Use encryption, multi-factor authentication for administrators, audit logs and mobile-device security controls where corporate devices are managed.
- Confirm compatibility with turnstiles, lift destination control, visitor QR codes and the landlord’s base-building systems before purchase.
Biometric access requirements
- Complete a necessity and proportionality assessment. A biometric should not be selected only because it is convenient or fashionable.
- Give affected employees clear information on purpose, retention, sharing and access/correction rights. Involve HR, legal or privacy stakeholders early.
- Prefer storing protected biometric templates rather than raw images where feasible; encrypt templates and separate them from general HR records.
- Provide a reasonable non-biometric alternative and a process for failed enrolment, injury, accessibility needs and false rejection.
- Test liveness detection, presentation-attack resistance and false acceptance/rejection performance in the actual environment.
The PCPD warns that wrongful disclosure can lead to unauthorised re-identification or impersonation. For procurement, this means biometric templates, enrolment stations, administrator accounts, backups and vendor remote access all require explicit controls.
Check the types of the access control system and how to choose the right one for your office.
3. Burglar alarm and intrusion detection checklist
A burglar alarm is valuable only when detection, verification and response work together. The design should use layered sensing and avoid relying on a single motion detector to protect an entire office.
- Protect perimeter doors with door contacts and vulnerable areas with suitable motion, glass-break or other intrusion sensors.
- Use separate alarm zones for reception/perimeter, general office, server room, executive or confidential areas and high-value storage.
- Provide duress or panic alarms only where there is a clear response plan and staff training.
- Use video verification where appropriate so monitoring personnel can distinguish a genuine intrusion from cleaners, contractors, HVAC movement or environmental causes.
- Define opening/closing schedules, authorised users, keyholders, escalation contacts and maximum acknowledgement times.
- Test mains failure, communications failure, battery autonomy, tamper signals and alarm transmission to the monitoring centre.
- Keep sensor maintenance, false-alarm investigation and periodic walk testing within the service agreement.
Hong Kong Police uses a phased response from full response to no response, and states that an installation may return to a higher response level after 90 false-alarm-free days. This makes alarm verification, maintenance and disciplined keyholder management commercial requirements, not optional extras.
Check Hong Kong Police certified Central Alarm Monitoring Station (CAMS) service provider like Securitas.

4. Integration, cybersecurity and privacy-by-design
Integration should reduce operator workload and improve evidence, not create a single uncontrolled point of failure. A practical office workflow is: a denied access attempt or intrusion alarm triggers the relevant camera view, the event is verified, the operator follows a documented escalation, and the incident record preserves access and video evidence under authorised retention rules.
- Put cameras, controllers, intercoms and alarm panels on segregated security networks or VLANs with controlled firewall rules.
- Change default credentials, disable unused services, restrict vendor remote access and require MFA for cloud and administrative access.
- Use role-based access: reception, security operator, HR credential administrator, IT administrator and auditor should not automatically have the same rights.
- Synchronise time across systems so video, access and alarm records can be correlated during investigations.
- Back up configuration and credential databases, then test restoration before move-in.
- Contractually define patching, vulnerability handling, data location, subcontractors, breach notification, system ownership and secure deletion at contract end.
Check Securitas' practices of security system integration.
5. Hong Kong move-in coordination checklist
- Landlord and property management: Confirm approvals for door works, cabling routes, lift lobby cameras, base-building links, riser access, work permits and contractor hours.
- Fire and life safety: Ensure access-controlled doors, electromagnetic locks, emergency break-glass units and release interfaces are coordinated with the approved fire and egress design. Do not allow security controls to impede safe escape.
- HR and privacy: Publish employee and visitor notices, define enrolment and offboarding, nominate data-access approvers and document alternatives to biometrics.
- IT: Reserve network addresses, switching capacity, PoE budgets, storage, certificates, DNS/NTP, monitoring and support ownership.
- Procurement: Compare bids against the same device schedule, integrations, testing, documentation, warranty, preventive maintenance and response SLA. A low equipment price may hide licensing, cloud, storage and call-out costs.
- Security operations: Create SOPs for alarm verification, access exceptions, lost credentials, visitors, contractors, incident export and evidence release.
6. Testing and handover before staff move in
ā 100% camera coverage check against approved drawings, including after normal lighting is switched off.
ā Image export test with correct date/time, readable playback and documented chain of custody.
ā Every access level tested on every relevant door, including expired, revoked and out-of-hours credentials.
ā Mobile credential tested on representative iOS and Android devices; fallback process tested.
ā Biometric false-reject handling and non-biometric alternative tested.
ā Fire alarm release, emergency break-glass, request-to-exit and door-held/forced alarms tested with the responsible life-safety parties.
ā Every intrusion sensor walk-tested; alarm receipt, video verification, keyholder call tree and escalation recorded.
ā Power, network and communications failure tests completed; battery backup and recovery confirmed.
ā As-built drawings, IP/device list, licences, configuration backup, warranties, admin procedure, training attendance and maintenance contacts delivered.
How to write the request for proposal
Ask each bidder to respond to the same outcome-based scope. Require a site survey, risk assumptions, coverage and door matrices, product data, privacy/cybersecurity controls, integration diagram, implementation plan, testing scripts, training, documentation, warranty and maintenance SLA.
Ask bidders to identify exclusions and dependencies on the landlord, IT network, fit-out contractor and fire services contractor. This makes commercial comparison more accurate and reduces change orders.
If your office fit-out is at design, tender or pre-handover stage, arrange a joint security site survey before ceilings and door works are closed.
Securitas Hong Kong offers integrated electronic security covering CCTV and video surveillance, access control, intrusion detection, monitoring, system design, installation and maintenance. A single coordinated assessment can turn this checklist into a camera plan, door matrix, alarm zoning plan, implementation programme and budget suitable for procurement.